APGENCO AEE Syllabus 2026 and Exam Pattern, Check Subject Wise Topics

The Andhra Pradesh Power Generation Corporation Limited (APGENCO) conducts a written exam to recruit eligible candidates for Assistant Executive Engineer posts. Candidates who will be appearing for the exam must know the syllabus and exam pattern to plan an effective preparation strategy. The syllabus outlines all the subject-wise topics that candidates have to prepare for the exam, and the exam pattern provides an overview of the complete exam format, including the number of questions, duration, marks, and more.

APGENCO AEE Syllabus and Exam Pattern 2026

The APGENCO AEE 2026 Written Exam will be conducted online in Computer-Based Test mode, and understanding the syllabus helps candidates to start their preparations. Preparing with the syllabus helps candidates to focus on the relevant topics rather than wasting their time on irrelevant topics.

APGENCO Recruitment 2026 Notification Out For 100 AEE Vacancies- Click to Check

AP GENCO AEE Exam Pattern 2026

The APGENCO AEE Exam 2026 will be conducted online and will include 100 objective type multple choice questions. The exam will be conducted for a total of 100 marks. The duration to answer all the questions asked in the exam is 3 hours. Each Question will carry 1 mark and there is no negative marking for any incorrect answer.

APGENCO AEE Syllabus 2026

The syllabus for the APGENCO AEE Exam will primarily cover core engineering subjects, including Electrical Engineering, Mechanical Engineering, Civil Engineering, and Electronics & Communication Engineering. A thorough understanding of the syllabus enables candidates to focus on key topics, manage their preparation effectively, and improve their chances of selection. Candidates can check the stream-wise important topics in the table below.

AP GENCO AEE Electrical Engineering Syllabus

• Electric Circuits and Network Theory
• Electrical Machines
• Power Systems
• Power Electronics
• Control Systems
• Electrical Measurements
• Analog Electronics
• Digital Electronics
• Electromagnetic Theory
• Generation, Transmission, and Distribution
• Utilization of Electrical Energy
• Switchgear and Protection
• High Voltage Engineering
• Signals and Systems

APGENCO AEE Civil Engineering Syllabus

• Building Materials
• Structural Analysis
• Strength of Materials
• Reinforced Cement Concrete
• Steel Structures
• Geotechnical Engineering
• Surveying
• Transportation Engineering
• Environmental Engineering
• Water Resources Engineering
• Fluid Mechanics
• Construction Planning and Management
• Irrigation Engineering
• Engineering Geology

AP GENCO AEE Electronics & Communication Engineering Syllabus

• Electronic Devices and Circuits
• Analog Electronics
• Digital Electronics
• Signals and Systems
• Network Theory
• Communication Systems
• Electromagnetic Theory
• Control Systems
• Microprocessors and Microcontrollers
• VLSI Design
• Digital Signal Processing
• Computer Networks
• Antennas and Wave Propagation

APGENCO AEE Mechanical Engineering Syllabus

• Engineering Mechanics
• Thermodynamics
• Fluid Mechanics
• Heat Transfer
• Refrigeration and Air Conditioning
• Manufacturing Processes
• Machine Design
• Theory of Machines
• Industrial Engineering
• Production Engineering
• Strength of Materials
• Power Plant Engineering
• Engineering Materials
• Hydraulic Machines

Best Books for AP GENCO AEE Exam Preparations

Here we have recommended some books that candidates must use in their preparation for the APGENCO AEE Exam 2026. Candidates can check the subject-wise books from the table provided below.

APGENCO AEE Preparation Tips 2026

Candidates must follow the tips mentioned below to improve their performance in the APGENCO AEE Exam:

• Understand the weightage before you start: Since core engineering subjects carry 70 of the 100 marks, allocate your study time roughly in that ratio — spend close to 70% of your prep time on your branch-specific technical subjects and the remaining 30% on Reasoning, General Awareness, English, Quantitative Aptitude, and Computer Knowledge combined. Don’t let aptitude prep eat into core subject time; it’s the smaller scoring section.
• Prioritize high-weightage technical topics first: Within your core subject, not all topics carry equal weight. For Electrical, focus first on Power Systems, Electrical Machines, and Control Systems, since these typically have the highest question density in AEE-pattern exams. For Civil, prioritize Structural Analysis, Strength of Materials, and Geotechnical Engineering. For Mechanical, start with Thermodynamics, Strength of Materials, and Theory of Machines. For ECE, begin with Analog/Digital Electronics and Communication Systems.
• Build a 6–8 week subject-wise timetable: Given the CBT is scheduled for 22–29 August 2026, candidates have roughly 7–8 weeks from now. Break this into: weeks 1–4 for concept-building across all core topics, weeks 5–6 for numerical practice and previous papers, and weeks 7–8 exclusively for full-length mock tests and revision.
• Solve previous year papers from related AP power sector exams: Since this is the first APGENCO-specific notification many candidates will attempt, also solve previous APTRANSCO AEE, APSPDCL AEE, and TSGENCO/TSTRANSCO AEE papers; the syllabus and difficulty level overlap closely, and these give a realistic sense of question patterns even without official APGENCO past papers.
• Practice numerical-heavy topics daily: Core engineering papers at this level lean heavily on calculation-based questions (machine design, power system fault calculations, RCC design, thermodynamics cycles). Solve at least 15–20 numericals daily from your weak areas rather than only reading theory.
• Don’t neglect the common/aptitude section: With 30 marks riding on Reasoning, General Awareness, English, Quantitative Aptitude, and Computer Knowledge, even basic, consistent practice (30–40 minutes daily) can secure 20+ marks relatively easily compared to the effort needed to gain equivalent marks in core subjects; this can be the difference at the cutoff line.
• Take sectional and full-length mock tests in the last 3 weeks: Simulate the 3-hour, 100-question CBT format under timed conditions at least twice a week starting from week 6. This builds the time-management skill needed since each question gets roughly 1.8 minutes on average across a mixed difficulty paper.
• Track and revise formulas weekly: Maintain a single formula notebook across all core subjects (especially Power Systems, Machines, SOM, Thermodynamics) and revise it every week rather than only before the exam. Formula-based recall under time pressure is one of the most common areas where candidates lose marks.